Follett C/E25HT400A/W Manual de usuario descargar pdf (Pagina 19)

How unit works — SensorSAFE models

SensorSAFE models provide “touchless” ice and water dispensing. When a container is placed within the

actuation zone below the ice or water chute on SensorSAFE dispenser models, an infrared signal reflects off

the container and is detected by the sensor. The sensor then sends a signal to the control board to activate the

appropriate components to dispense ice or water. LEDs on the board indicate when the board is receiving a signal

from the sensors.

A safety, shut-off feature automatically stops the unit from dispensing after one minute of continuous activation.

Dispensing can be restarted by moving the container away and then returning it to the actuation zone.

Dispensing can be temporarily suspended for cleaning by depressing and releasing the clean switch, located

under the left side of the top front cover. Depressing and releasing the button a second time will return the

dispenser to normal operating state. If the clean switch is not depressed a second time, the dispenser will

automatically resume normal dispense operation (CLN LED goes out) after two minutes. An LED on the control

board will light to indicate that the dispensing has been suspended by activation of the clean switch.

ICE MACHINE POWER, 230V, 50Hz

WHITE

4x4 JUNCTION BOX

BLACK

GREEN

Blue

Brown 220V 60Hz/230V 50Hz

Green/Yellow Ground

WTR

BLUE

CLEAN

SWITCH

NEUTRAL

WTR

CLN

SOL

PWR

GND

WTR

ICE

YELLOW

PURPLE

SWITCH

MAIN POWER

BLACK

WATER SENSOR

ICE SENSOR

BIN SIGNAL

SWITCH

BIN SIGNAL FROM ICE MACHINE

THERMOSTAT

RED -

FREESTANDING AND REMOTE

BLACK -

TOP MOUNT

ORANGE -

FREESTANDING AND REMOTE

WHITE -

TOP MOUNT

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 31 32

Comentarios a estos manuales

Sin comentarios

Follett C/E25HT400A/W Manual de usuario Pagina 19

Comentarios a estos manuales

Relacionado con productos y manuales para Máquinas productoras de hielo Follett C/E25HT400A/W